konica 7145

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • atech
    Technician

    50+ Posts
    • Aug 2010
    • 89
    #1

    [Misc] konica 7145

    anybody has an idea for konica 7145 the RADF and platen not working. the display says "reload A5R paper and start again". The machine is able to print the counter of the machine,but cannot make a copy when using RADF and platen.
    thanks.
    Tags: None
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Re: konica 7145

      I assume this does this when you put paper in the RADF? You probably need to go into tech mode and do the side guide adjustment for the df. I think on that model it's in 47 mode. ( I haven't done it on that model in a long time)
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • Darren King
          copiertech

          500+ Posts
          • Jul 2007
          • 652
          #3
          Re: konica 7145

          Silly question. What size paper are you putting in the DF and on the glass?

            Comment

            • atech
              Technician

              50+ Posts
              • Aug 2010
              • 89
              #4
              Re: konica 7145

              Originally posted by Darren King
              Silly question. What size paper are you putting in the DF and on the glass?
              It is not a silly question at all. This machine had so many errors. After solving one error,another error comes out. until I solved all errors that appeared on the display. I placed A4 size paper on the platen and I choose the first drawer which is set in A4. It does not get into ready mode. Same thing happened in RADF I placed A4 size original on the ADF but does not get into ready mode.I am not familiar with this machine, that's why I asked question if there 's somebody who happened to encounter with the same problem that could share his idea.

                Comment

                Previous template Next
                Working...