If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is a special nvram reset tool that loads from the cf card (along with a key press when turning on the machine).
It is still available as a download on KMBS. Go to SSD, Click download firmware and more on the left. Do a search for "NVRAM" and scroll way down and pick the model you need (the older C250/C252/C300/C351/C450/C352 series and p models) make sure to get the instructions and follow them or your machine will no longer display Konica Minolta but will be generic)
It will have this name
Cxxx NVRAM Recovery Card Firmware version GCN-G4
Thanks but this is still for the older generation and not for the newer one (C203,C253,C353). As conclusion i would say we have to wait a little bit longer until a NVRAM recovery tool for the "Mosel/Thames serie available is.
Comment