Trying to do booklet mode copies through the df on the copier. 8 1/2 x11 originals copied onto 8 1/2 x11R paper. The copier auto selects 64.7% reduction ratio, which is correct. This particular customer wants their copy to not be shrunk (the print on their originals is small enough that it would fit on 5 1/2 x 8 1/2 page, but when it gets reduced 64% it is too small for them). They swear their old copier would do this, but of course ours won't.
If you try to just set zoom to full size with booklet, it will shift the image off the page. Also, you cannot use centering with the booklet function.
If you try to just set zoom to full size with booklet, it will shift the image off the page. Also, you cannot use centering with the booklet function.
Comment