Bizhub 423 series upgrade memory for i-option

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gerg?
    Technician

    50+ Posts
    • Jul 2008
    • 67

    #1

    Bizhub 423 series upgrade memory for i-option

    Hi Colleagues!

    Does anybody know what type os memory could i use in Bh 223 sa upgrade memory for i-option? I know the UK-203, but in computer store it would be cheaper if I knew the exact type.


    Thanks for your help


    Gergő
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009

    #2
    Re: Bizhub 423 series upgrade memory for i-option

    You could always pull the rear cover off and actually look at the installed chip...specs should be on the original memory, and the upgrade chip will be the same. Parts manual might give the specs also. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

    Comment

    • Gerg?
      Technician

      50+ Posts
      • Jul 2008
      • 67

      #3
      Re: Bizhub 423 series upgrade memory for i-option

      Originally posted by emujo
      You could always pull the rear cover off and actually look at the installed chip...specs should be on the original memory, and the upgrade chip will be the same. Parts manual might give the specs also. Emujo
      Upgrade memory is only 1GB instead of 2GB standard memory. In C224 series both of them are 2GB.

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #4
        Re: Bizhub 423 series upgrade memory for i-option

        Originally posted by Gergő
        Upgrade memory is only 1GB instead of 2GB standard memory. In C224 series both of them are 2GB.
        Good info...thanks, I was only thinking about the type of memory DIMM/SODIMM/Speed etc...not the size. You are correct. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        Working...