Back up spares for Bizhub Pro C500 from Bizhub 8050

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • qantas
    Technician
    • Jul 2012
    • 23
    #1

    Back up spares for Bizhub Pro C500 from Bizhub 8050

    Hi mate,
    Friend of mine will throw his 8050 to bin, and ask me to take all neccessary parts to back up my Bizhub C500.
    I don't have enough room for taking the whole machine, and my Bizhub C500 still doing allright with just over 1 mil prints.

    Can you Guys suggest me of which part should definetely must take from 8050 ?

    thanks
    Tags: None
    • Mick01
      Trusted Tech

      250+ Posts
      • Nov 2012
      • 362
      #2
      Re: Back up spares for Bizhub Pro C500 from Bizhub 8050

      If it was me i would grab the following, Fusing unit, Transfer Belt Unit, ADU Unit.
      They are the most handy units to have on hand. If the Drums and Dev units are relatively new i would grab them (drums are the same and Dev units are the same but the developer is different)

        Comment

        • qantas
          Technician
          • Jul 2012
          • 23
          #3
          Re: Back up spares for Bizhub Pro C500 from Bizhub 8050

          Thanks mate,
          will dismantled tomorrow, if someone need any part of Bizhub 8050, I can take them for you for FREE.

            Comment

            Previous template Next
            Working...