If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I, also, have a unit giving me the same message. Went through a lot of troubleshooting before I came to realize that it was there to stay until I got an authorized KM tech to disable the LK-101 license kit. I ended up living with it.
Well said Ray...sometimes you just can't do it yourself, and as you said, you can live with the message. If you ever have a problem we can actually help you with, I hope you think of us. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
I have had some customers wanting to play copier/printer technician and it usually ends up with a big bill costing them double of what it would have cost them. And I never feel sorry for them. My last encounter was when a customer with a bizhub 200 (no contract) went and bought a drum unit off the internet when they got the change PC drum message. They replaced it but never changed the developer, reset a counter or ran F8 adjustment.
Comment