[Jamming] Magicolor2530DL, jamming issue at exit assy and missregistration

[fallguy]

I need some help with magicolor 2530 DL it keeps jamming at the exit just out of the fuser assy,
also the registration is out by 2 inches.
When doing internal prints the copies are fine, but it jams every time.
Any help would be much appreciated, thanks in advance.

[JustManuals]

Re: Magicolor2530DL, jamming issue at exit assy and missregistration

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[fallguy]

Re: Magicolor2530DL, jamming issue at exit assy and missregistration

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

Thank you Sir, I already have the manual.
Would you be a darling and read the manual with the intention of helping me solve this problem.
Having all these manuals at your desposal probably makes you one of the most experience technician on this site.

[Hansoon]

Re: Magicolor2530DL, jamming issue at exit assy and missregistration

Different machines but exactly the same problem with the sync solenoid:

http://www.copytechnet.com/forums/other-brands/67480-magicolor-2430dl.html

http://www.copytechnet.com/forums/konica-minolta/72492-bh-c10-when-copying-also-printing-shows-size-error.html

Hans

[fallguy]

Re: Magicolor2530DL, jamming issue at exit assy and missregistration

Different machines but exactly the same problem with the sync solenoid:

http://www.copytechnet.com/forums/other-brands/67480-magicolor-2430dl.html

http://www.copytechnet.com/forums/konica-minolta/72492-bh-c10-when-copying-also-printing-shows-size-error.html

Hans

Thanks Hans, that was the problem, I got this fixed all because of you, much appreciated.

[JustManuals]

Re: Magicolor2530DL, jamming issue at exit assy and missregistration

Thank you Sir, I already have the manual.
Would you be a darling and read the manual with the intention of helping me solve this problem.
Having all these manuals at your desposal probably makes you one of the most experience technician on this site.

You want ME to read the manual? Are you on drugs, please let me know which ones so I know what to stay away from!