[Jamming] c 451 jamming out of tray 2

[Guest]

got a jamming issue out of tray 2 , i confirmed it was not the cassette or feed tires..
paper starts to enter side feed about 2" out of tray station then you hear a noise and stops..
i can't really see anything obvious....any help would be great...


Joe

[tech51]

Re: c 451 jamming out of tray 2

got a jamming issue out of tray 2 , i confirmed it was not the cassette or feed tires..
paper starts to enter side feed about 2" out of tray station then you hear a noise and stops..
i can't really see anything obvious....any help would be great...


Joe

Assuming you've fitted new feed rollers and dfpv assembly, then three things come to mind. The magnetic clutch, the one way clutch (both in the feed assembly) can fail. But also check the rear locking claw on the right hand door for tray 2. These can fail and though the door looks shut, it isn't . Paper will not jam if feeding from trays 1,3 or 4 but will jam from 2. Hope this helps.....

[copiersrockdude]

Re: c 451 jamming out of tray 2

YEP !! it was was the back claw , how i missed that i don't know...
guess i'm buying the next round....

thanks a bunch man...