KM C-550 colorregistration defect in print/copy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • selmila
    Trusted Tech

    100+ Posts
    • Aug 2012
    • 133

    #1

    KM C-550 colorregistration defect in print/copy

    I am working on C-550(KM) and i am unable to solve the color registration problem in print/copy.The problem shows up from half page of A3 and if 1 A4 is printed it shows no problem,the problem shows up fron 2nd A4 if it is a continious print.i have changed all IU.transfer belt and also the macanical board. any suppote i can get on this.
  • mo0651
    Service Manager

    1,000+ Posts
    • Apr 2009
    • 1054

    #2
    Re: KM C-550 colorregistration defect in print/copy

    Post a pic of the problem......

    Comment

    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947

      #3
      Re: KM C-550 colorregistration defect in print/copy

      Originally posted by selmila
      I am working on C-550(KM) and i am unable to solve the color registration problem in print/copy.The problem shows up from half page of A3 and if 1 A4 is printed it shows no problem,the problem shows up fron 2nd A4 if it is a continious print.i have changed all IU.transfer belt and also the macanical board. any suppote i can get on this.
      Fuser line speed needs to be adjusted I'd be willing to bet.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

      Comment

      • Zeldaman
        Senior Tech

        500+ Posts
        • Mar 2011
        • 946

        #4
        Re: KM C-550 colorregistration defect in print/copy

        Hi there!
        As a tip: i'll change the transferroller every 100K copies/prints, because this sh..parts are allways good for quality-prblems.
        Greetings...

        Comment

        Working...