Any tips or tricks for running perfed paper through a c8000???

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AB1984
    Technician
    • Oct 2012
    • 64
    #1

    Any tips or tricks for running perfed paper through a c8000???

    My boss, in his infinite wisdom, took on a job that needed perfing, and got the perfs done first. We're now left to run the job without getting more than 100 sheets out between jams. Its getting Quite irksome, does anyone have any little tips, tricks or workarounds that might improve things a little. Or should I just grin and bare it (something I don't particularly want to do)

    Thanks for any help that may be forthcoming
    Tags: c8000, cade, konica, minolta, perforation
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Re: Any tips or tricks for running perfed paper through a c8000???

      What size is the paper and how is it perforated? Give us a picture, if possible.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • AB1984
          Technician
          • Oct 2012
          • 64
          #3
          Re: Any tips or tricks for running perfed paper through a c8000???

          I don't have a way of sending a picutre I'm afraid...but I'll try and describe it as best I can:

          Paper size: SRA3 (450x320mm)

          The perf is perpendicular to the feed direction, and seperates the trailing 1/3rd from the leading 2/3rds (approx)

          for the perferation itself, it looks like gaps of about 1/2mm, and the bits of paper holding it together are about half that

          Was that any good?

          thanks

            Comment

            • AB1984
              Technician
              • Oct 2012
              • 64
              #4
              Re: Any tips or tricks for running perfed paper through a c8000???

              just figured out how to scan it in...the black line is 10mm long to give you a point of reference
              C-550113-imp.jpg

                Comment

                • mrwho
                  Major Asshole!

                  Site Contributor
                  2,500+ Posts
                  • Apr 2009
                  • 4299
                  #5
                  Re: Any tips or tricks for running perfed paper through a c8000???

                  I'd suggest feeding the paper leaving the perforation at the trailing edge, but that's not always possible. You can use the process adjustment to slow down the machine speed and the feeding cadency. Other than that, I guess you can just cross your fingers and hope that your boss didn't buy just the right ammount of paper, as you'll most probably waste quite a lot.
                  ' "But the salesman said . . ." The salesman's an asshole!'
                  Mascan42

                  'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                  Ibid

                  I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    • AB1984
                      Technician
                      • Oct 2012
                      • 64
                      #6
                      Re: Any tips or tricks for running perfed paper through a c8000???

                      I like the idea of slowing the machine down, how would I go about that on the 8000?

                        Comment

                        • mrwho
                          Major Asshole!

                          Site Contributor
                          2,500+ Posts
                          • Apr 2009
                          • 4299
                          #7
                          Re: Any tips or tricks for running perfed paper through a c8000???

                          I was thinking of the C6501, I don't know if the 8000 has that option, but it should have - anyone else in the know can please chime in?
                          ' "But the salesman said . . ." The salesman's an asshole!'
                          Mascan42

                          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                          Ibid

                          I'm just an ex-tech lurking around and spreading disinformation!

                            Comment

                            • AB1984
                              Technician
                              • Oct 2012
                              • 64
                              #8
                              Re: Any tips or tricks for running perfed paper through a c8000???

                              I had a look in process adjustment and couldn't find anything, I'll give the manual a bit of a peruse

                                Comment

                                • methogod
                                  Senior Tech

                                  Site Contributor
                                  500+ Posts
                                  • Dec 2008
                                  • 915
                                  #9
                                  Re: Any tips or tricks for running perfed paper through a c8000???

                                  set the paper option to slow down, its called speed down, you can set it on the options for the paper, also i dont know how thick it is, but you can sometimes lower the paper specs, so it only runs though 1 fuser, less then 163gms, should help.

                                  Next time get it micro-perfed after you print.

                                    Comment

                                    Previous template Next
                                    Working...