Konica Minolta Magicolor Black IU not Resetting

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Datatek
    Junior Member
    • Oct 2012
    • 1
    #1

    Konica Minolta Magicolor Black IU not Resetting

    Ok, I installed a NEW OEM Black IU Unit and the machine tells me to check and install Black IU.

    Any suggestions.

    I did turn on/off and it didnt fix the problem!

    Thanks for the Help!
    Tags: None
    • Darren King
      copiertech

      500+ Posts
      • Jul 2007
      • 652
      #2
      Re: Konica Minolta Magicolor Black IU not Resetting

      Kinda hard to give good advice without a model, but, check to see if the chip is on the IU. If there, clean it and the contact in the machine.
      Darren

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: Konica Minolta Magicolor Black IU not Resetting

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            Previous template Next
            Working...