Konica Bizhub Pro C-6500... J-3209 Jams

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935
    #1

    [Jamming] Konica Bizhub Pro C-6500... J-3209 Jams

    I have been fighting this all day. What happens is when the paper exits the fuser it is not going down then up to the finisher. It jams just when it starts to head to the finisher, right when the motor turns the oppisite direction (Clear of the fuser) Any help would be so appreciated. I am ready to shoot this thing...
    Tags: None
    • Mick01
      Trusted Tech

      250+ Posts
      • Nov 2012
      • 362
      #2
      Re: Konica Bizhub Pro C-6500... J-3209 Jams

      Hi,
      This could be caused by the black sensor actuator worn down (65AA51311)

        Comment

        • RRodgers
          Service Manager

          1,000+ Posts
          • Jun 2009
          • 1947
          #3
          Re: Konica Bizhub Pro C-6500... J-3209 Jams

          Originally posted by Mick01
          Hi,
          This could be caused by the black sensor actuator worn down (65AA51311)
          Yep, that's what it is.
          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • Doug James
              Senior Tech

              Site Contributor
              500+ Posts
              • Jan 2012
              • 935
              #4
              Re: Konica Bizhub Pro C-6500... J-3209 Jams

              COOL... Thanks you guys, sure makes alot of sense. Going back saturday to fight with it some more.
              You guys are GREAT... Thanks so much...

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947
                  #5
                  Re: Konica Bizhub Pro C-6500... J-3209 Jams

                  Originally posted by Doug James
                  COOL... Thanks you guys, sure makes alot of sense. Going back saturday to fight with it some more.
                  You guys are GREAT... Thanks so much...
                  Put a dab of super glue on the tip to build it up some. (usually helps for me)
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    • Mick01
                      Trusted Tech

                      250+ Posts
                      • Nov 2012
                      • 362
                      #6
                      Re: Konica Bizhub Pro C-6500... J-3209 Jams

                      You are most welcome, happy to assist

                        Comment

                        • Doug James
                          Senior Tech

                          Site Contributor
                          500+ Posts
                          • Jan 2012
                          • 935
                          #7
                          Re: Konica Bizhub Pro C-6500... J-3209 Jams

                          Looks like the motor (Below the actuator you mentioned) wasn't working. Hoping it's just the motor and not the main board....

                            Comment

                            Previous template Next
                            Working...