If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
try disconnecting all the options and see if it still does it. If not then plug in one at a time until it errors out. Then replace the driver pwb for that option.
Otherwise you are looking at OACB or nvram. Nvram can only be order through SSD with an open ticket and management approval.
Just to let you know there was a bad connection from the sensor which gets interrupted when the cover plate of the service port is raised and this was stopping it booting from the Usb.
Comment