If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a client who has a INEO+ 253 with a broken fuser unit. I heard that the toner for the BizHub C253 will not fit the INEO+ 253. Does the fuser unit for Konica Minolta BizHub C253 work in the INEO+ 253? Thanks.
I have a client who has a INEO+ 253 with a broken fuser unit. I heard that the toner for the BizHub C253 will not fit the INEO+ 253. Does the fuser unit for Konica Minolta BizHub C253 work in the INEO+ 253? Thanks.
yes...they're just the same...but be sure to check if you're using 220v or 120v.
Comment