New machine, 3 weeks old. Skewing from tray 2 only, by 2mm+. I have swapped tyres, cleaned guide and mylar with no success. seems improved if front is side door is pushed in. Don't have experience on this machine. Can anyone suggest how to improve the skew?
-
-
Re: Konica Minolta c224
I would make sure the side door is not skewed, check the hinges. I did go to training on that machine and the door could cause problems with skew if it's not sitting straight on the machine.Love the Job Love the Work.
-
Re: Konica Minolta c224
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
-
Re: Konica Minolta c224
In the right side door, where paper comes out of the tray. There is a clear plastic guide. It locks in on each end. I've had a few machines, where one of the sides would pop out of place and cause skewing.
Everyone has the right to be stupid. Some people just abuse this privelage more than othersComment
Comment