Konica Minolta Bizhub C350 print quality

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aAandy
    Trusted Tech

    Site Contributor
    250+ Posts
    • Apr 2012
    • 370

    #1

    Konica Minolta Bizhub C350 print quality

    hey everywon

    this lovely C-350 prints internal prints (counter, gradation) beautifully both in full colour & B&W, copies are very faint (optics cleaned), B&W prints are also very faint - but full colour prints are perfect (including black content)

    anyone got any eye-deers?

    cheers
  • copymech
    Trusted Tech

    100+ Posts
    • Sep 2011
    • 196

    #2
    Had a simular problem not long ago. Looked like a optics problem but turn out being a dirty laser glass. I had to really scrub to get toner off.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Konica Minolta Bizhub C350 print quality

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • aAandy
        Trusted Tech

        Site Contributor
        250+ Posts
        • Apr 2012
        • 370

        #4
        Re: Konica Minolta Bizhub C350 print quality

        Originally posted by copymech
        Had a simular problem not long ago. Looked like a optics problem but turn out being a dirty laser glass. I had to really scrub to get toner off.
        if it was the laser slit glass, internal prints and colour prints would also be crap

        Comment

        • aAandy
          Trusted Tech

          Site Contributor
          250+ Posts
          • Apr 2012
          • 370

          #5
          Re: Konica Minolta Bizhub C350 print quality

          [QUOTE=JustManuals.com;357182]This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


          i hate spam - if i wanted a manual i would have asked for a manual

          if you cannot offer technical advice, please refrain from responding to my posts

          Comment

          Working...