C754 Card reader

[habik]

Hi All just a quick one

Which FW to load for the Touch Card reader to operate on C754.

Would the latest Mass production suffice or do I need special FW for it.. or should I just load the lot... or is it like a loadable driver for the card reader
cheers for any heads up..my first card reader install on C754 with papercut

I have this lot :

Mass:
A2X00Y0-F000-G20-70-100-CHECKSUM-4cfc

and special

A2X00Y0-F000-GD6-68-100-CHECKSUM-0393
A2X00Y0-F000-GQE-68-100-CHECKSUM-2891

[jjohnston12385]

If memory serves me right, FW isn't needed. It's a specific loadable driver for the card reader. I believe there are 2 or 3 different ones so be careful on which one you download. You will also have to go into tech rep mode to set the authentication device so it see it.

Hope this helps. :-)

Sent from my SCH-I605 using Tapatalk 2

[habik]

Re: C754 Card reader

If memory serves me right, FW isn't needed. It's a specific loadable driver for the card reader. I believe there are 2 or 3 different ones so be careful on which one you download. You will also have to go into tech rep mode to set the authentication device so it see it.

Hope this helps. :-)

Sent from my SCH-I605 using Tapatalk 2

Thanks,

Loaded Latest FW and loadable driver plus Billing settings set accordingly

Cheers

Just new machine to me that is all. last minute install ..you know one of those days

[jjohnston12385]

Oh I feel ya. Happens all the time. Glad I could help.

:thumbup:

Sent from my SCH-I605 using Tapatalk 2