BH-C-451 with FS-608 + Punchkit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3380
    #1

    BH-C-451 with FS-608 + Punchkit

    BH-C-451 with FS-608 + Punchkit.

    Have not seen the machine myself yet but the customer informed me that the dies of the punchkit are staying down blocking the paper path.

    When manually turned up the dies are coming down again as soon as the machine is being operated.

    Have no great experience with this finisher, any hints please?

    Hans
    “Sent from my Intel 80286 using MS-DOS 2.0”

    Tags: None
    • knightfall
      Senior Tech

      500+ Posts
      • Jul 2006
      • 633
      #2
      Re: BH-C-451 with FS-608 + Punchkit

      sometimes the dies are held in place because of piece of paper in the dies, try lubricating dies with light oil or wd40.
      Get your facts first, and then you can distort them as much as you please.

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3380
          #3
          Re: BH-C-451 with FS-608 + Punchkit

          Thanks Knightfall, according to the customer (a copyshop with some knowledge about MFP's) a replacement punchkit gives the same problem.

          Hans
          “Sent from my Intel 80286 using MS-DOS 2.0”

            Comment

            Previous template Next
            Working...