I have a client who has changed the position of the 5 screws from the transfer guide plate (not allowed to working with).Does anybody knows the exact position of those screws?
-
-
Re: bizhub 750 position of 5 screws from the transfer guide plate
The 3 "locked" shoulder screws have worked loose since day 1 for us. I had a 601 that I taped them in place early... they still came loose and raised the guide into the drum. I think if you take them in fully tight, then turn them back out 1.5-2.0 turns you should be fine. -
Re: bizhub 750 position of 5 screws from the transfer guide plate
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Comment
Comment