Konica 4695 mf Running slow (Memory full)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935

    #1

    [Misc] Konica 4695 mf Running slow (Memory full)

    Customer says the copier is running slow. It will print ok with text but pictures etc slow it way down.
    Is their a way to delete "trash" from the hard drive ?.... Thanks so much for your input
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935

    #2
    Re: Konica 4695 mf Running slow (Memory full)

    Guessing the memory is full but pretty sure the hard drive is the problem...

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Konica 4695 mf Running slow (Memory full)

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • blazebusiness
        SanDiegoCopierRepair.com

        Site Contributor
        1,000+ Posts
        • Apr 2010
        • 1250

        #4
        Re: Konica 4695 mf Running slow (Memory full)

        Originally posted by Doug James
        Customer says the copier is running slow. It will print ok with text but pictures etc slow it way down.
        Is their a way to delete "trash" from the hard drive ?.... Thanks so much for your input
        I would start by verifying the configuration of the machine. Does it have the additional 256 or 512 memory? 256-MB memory-- (2600795100) 512-MB memory-- (2600795200). The hard drive was also not standard. Does it even have one?40-GB HDD (A08D0W1) Why do you think it's a memory issue?(Not that your wrong, but that's just one possibilty).....Are they getting a memory full message? Does it happen only when printing or copying or scanning or faxing? Or all of the above?
        sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

        Comment

        • Doug James
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2012
          • 935

          #5
          Re: Konica 4695 mf Running slow (Memory full)

          I haven't been to the machine yet (new customer). Was trying to get a running start. I am not real familiar with these machines. But I was thinking it was some sort of memory issue. The customer said it takes alot longer to print pictures than anything else.

          Comment

          • blazebusiness
            SanDiegoCopierRepair.com

            Site Contributor
            1,000+ Posts
            • Apr 2010
            • 1250

            #6
            Re: Konica 4695 mf Running slow (Memory full)

            Originally posted by Doug James
            I haven't been to the machine yet (new customer). Was trying to get a running start. I am not real familiar with these machines. But I was thinking it was some sort of memory issue. The customer said it takes alot longer to print pictures than anything else.
            Sounds like they may need a memory upgrade then. When the optional memory is added, it increases the performance for both copier and printer operations
            Those machines are almost identical to the C20's(see pics below). Just different drum unit & toners so the Magicolor costs (cpc) more to operate and the C20 costs more to purchase . So you pay more at the time of purchase to get cheaper prints(C20), or you pay less to purchase and pay thru the nose to print(Magicolor).konica_minolta_bizhub_C20.jpgMagicolor 4695.jpg
            Last edited by blazebusiness; 06-21-2013, 06:18 AM.
            sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

            Comment

            • Doug James
              Senior Tech

              Site Contributor
              500+ Posts
              • Jan 2012
              • 935

              #7
              Re: Konica 4695 mf Running slow (Memory full)

              That is a HUGE help.. Thanks so much for your time and info... Really appreciate you !!

              Comment

              • blazebusiness
                SanDiegoCopierRepair.com

                Site Contributor
                1,000+ Posts
                • Apr 2010
                • 1250

                #8
                Re: Konica 4695 mf Running slow (Memory full)

                Originally posted by Doug James
                That is a HUGE help.. Thanks so much for your time and info... Really appreciate you !!
                Glad to help. The machine has 64mb standard and 1 empty slot to upgrade the memory. Don't worry about installing the hard drive...just by the dimm and put it in the empty slot. Should help a lot with pereformance.
                sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

                Comment

                Working...