konica minolta c650 fiery

[antoney suresh das]

Hi Guys,
I have a bizhub c650 a used machine the fiery for some reason is not along with the machine . Now the network access is disabled now if I need to use the machine without the fiery what are the adjustments to be made to enable the network without the fiery.Help guys!
thanks

[bizhub1]

Re: konica minolta c650 fiery

In service mode, change controller setting to 0

[antoney suresh das]

Re: konica minolta c650 fiery

thanks bizhub 1 a little more in detail i am a Ricoh guy

[princef18]

Re: konica minolta c650 fiery

You'll need to go into the service mode --> System 2 --> Image Controller setting --> Controller 0

Then restart the machine. It should be able to have network access now.

[antoney suresh das]

Re: konica minolta c650 fiery

Hi Prince,
i checked the 550 had i believe a external controller was there but not there anymore .When i checked system 2 the controller icon is'nt there.i guess some setting has to be unselected pls guide

[johnyb]

You need the little jumper board that you take off to fit the fiery.

[princef18]

Re: konica minolta c650 fiery

You might have to wait for a while for the Image controller setting button to show up. I don't know why it does that. But it eventually pops up. Poke around the service for a few mins till it appears. Also try to restart the machine a few times.

I had a case like that a few weeks ago. Eventually it showed on the screen and I changed it back to Controller 0.