Hi i have a develop ineo +224 with a few problems
brand new machine right out of the box only has 60 copies on it. heres a few of the problems;
when turning on the machine it wont boot up it gets stuck on the boot up screen, unless you have the front door open, once you have it running it says it has jammed but there a no jobs in the job list it is just doing a phantom jam with the code 9901 also jams even if there is no paper in the trays, i have replaced the hard drive with no effect and also updated firmware , still the same problem anyone had this problem before, also it was asking a for yellow drum but after doing firmware that message has gone.
brand new machine right out of the box only has 60 copies on it. heres a few of the problems;
when turning on the machine it wont boot up it gets stuck on the boot up screen, unless you have the front door open, once you have it running it says it has jammed but there a no jobs in the job list it is just doing a phantom jam with the code 9901 also jams even if there is no paper in the trays, i have replaced the hard drive with no effect and also updated firmware , still the same problem anyone had this problem before, also it was asking a for yellow drum but after doing firmware that message has gone.
Comment