[Misc] bizhub 223 not counting duplex through key counter

[oldschool]

I've searched the manual but I cant seem to find the setting that tells a bh 223 to send a pulse to the key counter for the second side of a copy. I have a vague recollection of this being one of those "not mentioned in any manual" dip switches.
Any ideas as to where this setting is?

[TheOwl]

Re: bizhub 223 not counting duplex through key counter

I am guessing that you are using one of the Vendor Modes within the machine.

I haven't played with Vendor Modes in quite some time, but from memory would couldn't double side because of this exact reason.

[JR2ALTA]

The Billing Mode is an extra code you input immediately after entering service mode.

There you can change the clicks for ledger

[rrrohan]

Re: bizhub 223 not counting duplex through key counter

its been ages but i recall there are 2 modes for count

i think 1 is from paper pickup and one is for exit

exit would allow for duplex count and not charging for jams

[JR2ALTA]

Re: bizhub 223 not counting duplex through key counter

Thanks for the "Like" Allan. LOL. Almost 10 years ago, my wisdom has stood the test of time.