C252 and FTP Scanning

[pepper38_cnd]

Re: C252 and FTP Scanning

You got it! when scanning to the root directory of an FTP no path is required just put either . or / depending on what your equipment accepts now if you were scanning to a folder inside the root say C:/scan/joe you would only put /joe as the path.

Re: C252 and FTP Scanning

FINALLY I GOT IT. Stupid thing...I had to put a . instead of scans in the file path.

[keller34]

OK so I gave up on the SMB, don't really need it, and went to FTP. I downloaded, installed, and configured the FTP to the "c:\scan" folder. in the web interface of the 252 I went to scan and set up a new registration with these settings:

Name: j
index: abc
Main is checked

Destination information:

Host address: Box is checked to enter host name, QUADGREYDELL
File path: scan
User id: anonymous
Password anonymous
Anonymous: ON
PASV: ON, Tried OFF too
Proxy: OFF
Port No.: 21

I have tried and tried but it errors saying login error. I do not have a password on my computer and the folder is set with full access for Everyone.

Any ideas?