Paper with Gummed border through Bizhub 1200p?

[AB1984]

We've just got some stock in that has a 1cm margin of gum round the outside (its the sort of thing that you lick and fold over to return or something). I was just wondering if anyone knew how this gum reacts to the heat in the printer and if its going to break it.

Many thanks

[methogod]

Re: Paper with Gummed border through Bizhub 1200p?

the self mailers are pressure seal, as long as they are laser safe, they should be fine.

run it at a slower speed, like CPM down on a C6501, so it runs slower, see how it runs before going at full speed.


I would also run it face up so its got the shortest paper path possible.


good luck...