I'll give a bump in rep and an adda boy to the first person to tell me what the PRIMARY purpose of this litte thing is.
-
Last edited by Aneurysm; 08-18-2013, 07:26 PM.Color is not 4 times harder... it's 65,000 times harder.
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it. -
Re: What dies this thing do?
paper dust collector from registration roller usually on older konicas -
Re: What dies this thing do?
Man I should take pics of some of those we have in the 601/751's at the schools....they just ooze paper dust like crazy..."In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
Comment
-
Re: What dies this thing do?
ditto what luther said but some of the 600 and ups used them on the transport/prereg rollers.And Star Trek was just a tv show...yeah right!Comment
-
Re: What dies this thing do?
Paper dust collector for what?Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
-
Re: What dies this thing do?
There are two plastic rollers right before the registration roller where they sit snug right up against them. I've seen them in 600/750...and they maybe in the 601/751...now that you brought it up I can't remember if they are or not...but they may be in both series..."In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
Comment
-
Re: What dies this thing do?
You also get them in 1050pro series and later.....I clean them with a straight edge or vac them...The gene pool could use a little chlorine.
Comment
-
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
-
Re: What dies this thing do?
Well they are mostly in high speed machines....and before registration so probably to keep registration and the IU from getting caked in the dust...as I said before in schools where they do not use the highest quality paper that massive amounts of dust would be a nightmare if they got clogged up in those areas..."In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
Comment
-
Re: What dies this thing do?
Anyone else?Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
-
What's your problem? Is this a riddle?Comment
-
Re: What dies this thing do?
They are to collect the talc/filler from the cheap paper often used so that it does not get carried further into the machine and get attracted to the drum along with the toner, as this would cause blotchy copies as well as even more toner dumping as the more white dust that is mixed with the recycled waste toner, gives even greyer black patches which gives even more over-toning !!There is a large full width collector on the 950/920/1050 series that is on the underside of the sync/reg roller and these little pads are on top on the white pressure rollers. A further one is inside the top of the right hand side door of the same units and is normally forgotten about as it is unseen!Please do not PM me without asking first.Comment
-
Re: What dies this thing do?
Minimerlin, you sir are correct.Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
-
They also cause flat spots on the white idle rollers, throw em outComment
Comment