Konicaminolta 950 pro

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Saghir377
    Technician
    • Feb 2013
    • 47

    #1

    Konicaminolta 950 pro

    Good morning. Sorry yesterday i post C-0010 by mistake i did not mention model number it is from konicaminolta 950 code from adu board if any body have some solution kindly help me
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Konicaminolta 950 pro

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • Mick01
      Trusted Tech

      250+ Posts
      • Nov 2012
      • 362

      #3
      Re: Konicaminolta 950 pro

      Communication issue between circuit boards.
      Check all connections on PRCB and ADU board. Disconnect LCT. If these are unsuccessful it is time to start replacing boards. PRCB would be the likely culprit.
      Was anything done on the machine prior to this code appearing. In my experience a lot of these "communiation codes" are TIFF faults (Tech induced faults)

      Comment

      • sunderr018
        Junior Member
        • Aug 2013
        • 1

        #4
        Re: Konicaminolta 950 pro

        Hi,,
        iam facing these code one time in konica minolta 950 mchine
        for ur error c-0010 first u check in your machine is their the CF (compact flash) card other wise these problem will occur..

        Comment

        Working...