Can find part in C280 manual

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David Morrison
    Digital Tech II
    • Feb 2010
    • 43

    #16
    Re: Can find part in C280 manual

    Originally posted by emujo
    I'm sorry, I seem to have missed all your helpful posts and technical inputs...it's a 2 way street, take the bashing and say thanks or nothing until you've contributed something. Emujo
    ok, I want to be more helpful. How do I get notifications when people have questions?

    Comment

    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009

      #17
      Re: Can find part in C280 manual

      You don't but when you answer, or ask a question, you will be subscribed to that thread. When someone posts a response you will get an email stating so. Other than that, just pop on once in a while and if you can offer some assistance, provide it. After you've helped other techs, you will also start to hammer on the idiots that ask for firmware or manuals, for free, on their 1st posts. It's actually a lot of fun to ridicule them, but you'll see...Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

      Comment

      • habik
        Service Manager

        Site Contributor
        1,000+ Posts
        • Apr 2010
        • 2013

        #18
        .OK Google! ... will I need Berrocca this morning?
        Firmwares HERE

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3370

          #19
          Re: Can find part in C280 manual

          "I don't have time."
          "You are the lazy one for not lending me a hand when a fellow technician is in need!"
          "Geesh. Grow up, will you!?"
          "It's nice to know that there are helpful people on here and not just troublemakers."
          I think you're a dork, not a "Fellow Technician"

          Real techs do not communicate with their colleagues in this way.

          Hans
          “Sent from my Intel 80286 using MS-DOS 2.0”

          Comment

          • David Morrison
            Digital Tech II
            • Feb 2010
            • 43

            #20
            Re: Can find part in C280 manual

            Originally posted by Hansoon
            I think you're a dork, not a "Fellow Technician"

            Real techs do not communicate with their colleagues in this way.

            Hans
            No kidding. I asked a simple question and several of you jumped on my case instead of helping me out. A couple people were helpful, but most everyone else was rude. I only use this web site as a last resort anyway.

            Comment

            Working...