If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I know on the bh 215 (same engine) there was a key counter connector but no way to enable it in the service mode. That may have changed with a firmware update. See if the option is in the service modes. If not than for some reason they've decided not to allow that feature in this model.
I have managed to sort it out. Connector P019 on mfp board is for the plugin counter. Doesn't show in the manual but figured it out. Then u just need to enable the plugin counter in service mode , stop, 9.
All sorted
Comment