Prismasync software for OCE CS665

[surgeon]

[methogod]

Re: Prismasync software for OCE CS665

should be the same thing as the internal ic408....

if i think its just a built in controller.....


let me know if you need the konica version - if you 100% down, i can try to help you get back up by installing the software.

may look like a Konica to the fiery, but should work just fine.


post some images or hit me on skype (methogod)

[surgeon]

Re: Prismasync software for OCE CS665

should be the same thing as the internal ic408....

if i think its just a built in controller.....


let me know if you need the konica version - if you 100% down, i can try to help you get back up by installing the software.

may look like a Konica to the fiery, but should work just fine.


post some images or hit me on skype (methogod)

Hi.
Thanks for quick reply.
We don't have ic-408.
I send pictures of print controller.

I don't know were find software for this PC.
I try to install creo software from version 1.0 and he don't work.

Around me don't have similar digital machines.
I not have another ways for take software for prismasync.


20130916_144239.jpg20130916_144139.jpg20130916_144155.jpg20130916_144200.jpg

[jotunn]

Re: Prismasync software for OCE CS665

Nice - ordinary PC, but definitely not a Konica Minolta/EFI Fiery clone - looks like OCE's own solution. The only thing from EFI could be an interface card - but I'm almost 100% sure that none of KM/EFI software could run on this controller.

It would be nice if you could post some good photos of interface card (both sides).

[surgeon]

Re: Prismasync software for OCE CS665

Today at evening taken photos of interface card )))20130916_235658.jpg20130916_235650.jpg
Photos not so good.
Tomorrow take good photos.

[Setright]

[surgeon]

Re: Prismasync software for OCE CS665

Very lazy to search the.
They want to sell new equipment.

[malamat]

Re: Prismasync software for OCE CS665

I also faced the same problem. can anyone help for oce 665 prismasync controller system cd.i have only two floppy disk.

[methogod]

Re: Prismasync software for OCE CS665

buy a USB floppy drive on ebay or amazon, see if disks read.

[malamat]

Re: Prismasync software for OCE CS665

buy a USB floppy drive on ebay or amazon, see if disks read.

hi. i have floppy drive and floppy disk but no info on how to install.