Minolta EP-2010 Programming tray #2

[Bill Monroe]

I've got a Minolta EP-2010 and need to find out how to reprogram the paper size in tray 2. I'm able to get into the tech mode and have been able to get the display to read out a metric size but I need it to display legal. My manual doesn't tell me and I'm not going to be able to sell this customer a new machine because the machine has only 1.6K. Still almost new. This the only 2010 I have and am not a big Minolta fan. Any help would be greatly appreciated.

Aloha,
Mr. Bill (Oh Noooo!)

[cobiray]

Enter tech rep mode. Press 9. (display should be 2F) Enter 356. Press paper select key. (display should be sC) Enter 216. Press paper select. Exit tech mode. Paper size for tray 2 should indicate legal.

[Bill Monroe]

Hey Dude!
You are the man! Tried the solution and it worked beautifully. Thanks ever so much. Or as we say here in Hawaii, MAHALO!!

Mr. Bill (Oh Noooo!)

[cobiray]

You're welcome. The last generations of the analog low end Minolta's still had you input the paper size in mm and there is really not much of a chance figuring it out unless you know the old system.