sc 29-07 KONICA MINOLTA 8050

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mdar
    Technician
    • Feb 2013
    • 10
    #1

    [Error Code] sc 29-07 KONICA MINOLTA 8050

    error code sc 29-07There is a problem with this code Please help if there is an effective solution Program has been used1. Enter the 36 mode.2. "36 mode menu screen"Press the[3. Image quality adjustment] key.3. "Image quality mode menu screen"Press the [2. Printer gamma adjustment] key.4. "Printer gamma adjustment menu screen"Press the [2. Printer gamma sensor adj.]I shows error 31Program has been used2. "36 mode menu screen"Press the [1. Process adjustment] key.3. "Process adjustment menu screen"Press the [2. Drum peculiarity adjustment] key.4. "Drum peculiarity adjustment menu screen"Press the [3. Automatic gamma adjustment]I shows error code 29-07 Note Has been replaced by the developerI'm very tired of this holidays Please help
    Tags: code, drum, error, image, key, printer, quality, screen, shows
    • Mick01
      Trusted Tech

      250+ Posts
      • Nov 2012
      • 362
      #2
      Re: sc 29-07 KONICA MINOLTA 8050

      I would try the following in this order.
      Output test pattern 81 and check for correct output of the chart (all 4 colours are on the test chart)
      Clean the gamma sensor in the colour registration unit.
      Replace your yellow developing unit

        Comment

        • mdar
          Technician
          • Feb 2013
          • 10
          #3
          Re: sc 29-07 KONICA MINOLTA 8050

          Originally posted by Mick01
          I would try the following in this order.Output test pattern 81 and check for correct output of the chart (all 4 colours are on the test chart)Clean the gamma sensor in the colour registration unit.Replace your yellow developing unit
          Has been replaced by the yellow developing unit and Clean the gamma sensor in the colour registration unit But the problem persists

            Comment

            • mdar
              Technician
              • Feb 2013
              • 10
              #4
              Re: sc 29-07 KONICA MINOLTA 8050

              I'm very tired of this device It is the second I have the same problem in the two devices Is it possible to have a role in this heat problem Note that the device used before entering into Iraq Because in Iraq No new devices

                Comment

                • Mick01
                  Trusted Tech

                  250+ Posts
                  • Nov 2012
                  • 362
                  #5
                  Re: sc 29-07 KONICA MINOLTA 8050

                  Hi,
                  Have you outputted test pattern 81 to se if all colours are being printed??

                    Comment

                    • mdar
                      Technician
                      • Feb 2013
                      • 10
                      #6
                      Re: sc 29-07 KONICA MINOLTA 8050

                      Originally posted by Mick01
                      Hi,
                      Have you outputted test pattern 81 to se if all colours are being printed??


                      Hello
                      81 has been applied, but without result
                      The same problem to some extent now
                      Pictures fade more and more
                      Thank you very much my friend Mick01
                      To interact with the subject
                      I hope that you find me solutions, etc if possible

                        Comment

                        Previous template Next
                        Working...