bizhub c280

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fancheta
    Technician
    • Oct 2013
    • 30

    #1

    [Error Code] bizhub c280

    Need some help
    Have a c280 that pops an error code every so often when copying
    error code c2556.

    Recently installed was a yellow dev unit and iu.

    Plz help.
  • Bullet71
    Technician
    • May 2009
    • 29

    #2
    Re: bizhub c280

    We have one doing exactly the same, we have changed drum, dev unit, hopper and sub hopper and the small board that controls the toner unit yet still get the error. Only thing left for us to try is the Main Board. We are currently manually toning machine and it works for about 2 weeks.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: bizhub c280

      This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • PeterG
        Trusted Tech

        100+ Posts
        • Jul 2008
        • 177

        #4
        Re: bizhub c280

        Go into service mode- State Confirm.
        What is the Y toner level?

        Comment

        • dirtyfingers
          Technician
          • Sep 2013
          • 35

          #5
          Re: bizhub c280

          good call Peter
          State confirm is a great place to get info
          if its 3% then its wanting more toner
          Should be around 6 to 7%


          Service manual says
          Front side relay board (where Dev units plug in )
          PRCB

          drive clutches for toner drive are common (whole unit)
          This is where you can manually tone up ...slowly
          its slow because the clutch is slipping.
          The internal clutches are the same ..so you can swap them over to test (if you feel like it )

          Cheers

          Comment

          Working...