Minolta c450 c-d370

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • geltrons
    Technician
    • Apr 2007
    • 37
    #1

    Minolta c450 c-d370

    good day to all

    have a minolta c450 , after a power failure displayed c-d370. rested the machine using stop-0-7-1-3-9.
    after restart displayed japanese language, changed the marketing are, displayed enter serial number and
    upon entering machine is ready

    now my problem is, while registering the IP address machine as for reboot and the entered IP address is
    vanished. DHCP setting, Auto IP is always turned on after reboot. also not aquiring IP

    Your help is needed

    regards
    Thomson
    Tags: address, c450, good, language, minolta, power, set, setting
    • gibo
      #2
      konica milolta c450

      have a konica minolta.when i power on the machine,it reboot many times.sometimes when the machine is a copy mode,when you press START bootton,it reboot again.please help me to solve this problem.waiting your reply.
      thankyou

        Comment

        • gibo
          #3
          konica minolta touch screen off and on

          hello sir
          my konica minolta 450.when i power it ON,the touch screen will come on for some few seconds then went off,while the machine is ON.
          PLEASE I need you help to tell me solve this problem.
          even i press the reset keys,thhe machine cannot steel work. thankyou

            Comment

            • Synaux
              Service Manager

              Site Contributor
              1,000+ Posts
              • Mar 2012
              • 1224
              #4
              Re: Minolta c450 c-d370

              Originally posted by geltrons
              good day to all

              have a minolta c450 , after a power failure displayed c-d370. rested the machine using stop-0-7-1-3-9.
              after restart displayed japanese language, changed the marketing are, displayed enter serial number and
              upon entering machine is ready

              now my problem is, while registering the IP address machine as for reboot and the entered IP address is
              vanished. DHCP setting, Auto IP is always turned on after reboot. also not aquiring IP

              Your help is needed

              regards
              Thomson
              Do you still need help with this? I am pretty sure you need to run the NVRAM recovery firmware and execute the NIC reset. "For C450/C351: 20070301_4037-F000-Gcn-G4-000(00)_CHECKSUM-29F9.EXE"

              TNBT0700091EN00

                Comment

                • gibo
                  #5
                  c450 c-d370

                  hello sir
                  have error code d-203.
                  when power on the machine is show the above code.
                  have done trouble reset,but steel not working.
                  let me know where is the problem
                  an have a solutution to this problem.
                  it very urgently.
                  thankyou

                    Comment

                    • Synaux
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Mar 2012
                      • 1224
                      #6
                      Re: c450 c-d370

                      Originally posted by gibo
                      hello sir
                      have error code d-203.
                      when power on the machine is show the above code.
                      have done trouble reset,but steel not working.
                      let me know where is the problem
                      an have a solutution to this problem.
                      it very urgently.
                      thankyou
                      Are you an end user or a tech?
                      If you have access to KM firmware, I suggest you perform what I outlined in my prior post.

                        Comment

                        • RRodgers
                          Service Manager

                          1,000+ Posts
                          • Jun 2009
                          • 1947
                          #7
                          Re: Minolta c450 c-d370

                          Make a new thread and stop hijacking an exsiting one!!!!
                          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                            Comment

                            • gibo
                              #8
                              Re: Minolta c450 c-d370

                              hello big boss
                              am just a USER of konica minolta
                              but if you lead me the way to solve this problem,sure i can try
                              your help will be greatful to me
                              waiting your kind reply
                              thankyou

                                Comment

                                • sholly
                                  #9
                                  Re: Minolta c450 c-d370

                                  hello,
                                  please what are the step to take in NVRAM recovery. i am using c351. please i need your help

                                    Comment

                                    Previous template Next
                                    Working...