Got a 6500 that's suddenly developed a bad skew - it seems to be from all trays. The contact between conveyance rollers at M2 flap wasn't great, so bent the plate back a little to get better contact. Tray Align on the fiery and CD skew adj not helping. Given all other rollers a good clean.
It'd had a couple of bad jams between the PFU and main carriage, I'm guessing there might be some torn paper obstructing, but can't see anything...
It'd had a couple of bad jams between the PFU and main carriage, I'm guessing there might be some torn paper obstructing, but can't see anything...
Comment