c25 or c35 box worth pushing ?

[jotunn]

Re: c25 or c35 box worth pushing ?

C3350/C3380 - there is no service documentation available at this moment (CSES/Infohub), and I couldn't take a look at internal design, but it seems that this is the same crappy design as C35. I bet that the only difference will be PWB-MFP, panel, software and exterior design for modern look. But the rest will be the same as in C35 - frame, PRCB, mechanical design, scanner, ADF. So probably those machines will share 50% problems with earlier model, and they will have few brand new problems - new software (bugfixes once a week), cold solder joints and other.

[kyoceran]

Re: c25 or c35 box worth pushing ?

good box on the whole, but on two separate machine we have experienced the k IU going feint on the op and is only fixed by re inserting the K IU, any ideas for a long term fix, Develop unsure !

[Mooseface2r]

Re: c25 or c35 box worth pushing ?

has anyone got an idea what the C3350/3380 will be called in develop numbers?

[WildbillC]

Re: c25 or c35 box worth pushing ?

Skip the C25. The C35 is OK, but not in the same league as a C224e. It all depends on where it is placed.....