Konica minolta bizhub 282 alert

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • awad
    Technician
    • Mar 2010
    • 21
    #1

    Konica minolta bizhub 282 alert

    hi everybody

    I have KONICA MINOLTA BIZHUB 282,

    After warm-up I tried to copy, then I got this message


    !*! ABORT !*!

    code = 0x00e00133
    taskname = tRT24000
    taskid = 0x00005dc0
    sp = 0x89f41aa8
    ra = 0x81306e18
    build-4167. 090520




    Then the machine restart again


    Please advice

    Thank you in advance
    Tags: None
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Konica minolta bizhub 282 alert

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      http://www.justmanuals.com



      Paul@justmanuals.com

        Comment

        • Copier Addict
          Aging Tech

          Site Contributor
          10,000+ Posts
          • Jul 2013
          • 14381
          #3
          Re: Konica minolta bizhub 282 alert

          It is most likely the MFBS board. Replace it with a known good one. Don't forget to swap the NVRam when you do this.
          Hope this helps

            Comment

            • awad
              Technician
              • Mar 2010
              • 21
              #4
              Re: Konica minolta bizhub 282 alert

              Originally posted by JustManuals.com
              This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


              http://www.justmanuals.com



              Paul@justmanuals.com

              I have the service manual but I did not find any thing about this matter.

              regards

                Comment

                Previous template Next
                Working...