If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Have you tried pulling and cleaning the print heads? Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Have you tried pulling and cleaning the print heads? Emujo
Good idea, but I pulled the transfer belt and it's pretty trashed from when the fuser failed and a piece of foam from the pressure roller got wedged in the belt. Looks like I'll need a new transfer belt.
Comment