konica minolta bizhub 652 drum unit replace message

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • awad
    Technician
    • Mar 2010
    • 21

    #1

    konica minolta bizhub 652 drum unit replace message

    Please Dears,

    How to reset drum replace message for Konica Minolta bizhub 652

    Thanks in advance
  • frankencopier

    #2
    Re: konica minolta bizhub 652 drum unit replace message

    Obvious part first - have you replaced the IU?

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: konica minolta bizhub 652 drum unit replace message

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:





      Paul@justmanuals.com

      Comment

      • awad
        Technician
        • Mar 2010
        • 21

        #4
        Re: konica minolta bizhub 652 drum unit replace message

        Originally posted by frankencopier
        Obvious part first - have you replaced the IU?

        Thanks for your kindly reply

        I did not change IU, the copy quality is good but I want to remove the message only.

        I had the same problem with bizhub 600 before and I cancelled the message, but I can not do the same with bizhub 652.

        regards

        Comment

        • SmellsHot
          Head Tech

          500+ Posts
          • Dec 2009
          • 512

          #5
          Re: konica minolta bizhub 652 drum unit replace message

          change software switches
          Everyone has the right to be stupid. Some people just abuse this privelage more than others

          Comment

          • Synaux
            Service Manager

            Site Contributor
            1,000+ Posts
            • Mar 2012
            • 1224

            #6
            Re: konica minolta bizhub 652 drum unit replace message

            Originally posted by SmellsHot
            change software switches
            This model doesn't need the special firmware, right?

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009

              #7
              Re: konica minolta bizhub 652 drum unit replace message

              Incorrect, you must install the firmware or the needed changes to the soft switches will not take. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

              Comment

              Working...