Bizhub C7000P jam 1701 and 1710

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sauce_boss
    Technician
    • Oct 2011
    • 26

    #1

    Bizhub C7000P jam 1701 and 1710

    This machine only has 140k on it has starting getting these jams. I have tried replacing the registration and pre registration clutches. Found out it only seems to do this from the PFU trays 1,2,3 are fine. I Then tried replacing the last clutch that drives the paper out of the PFU still getting these jams. Has anyone seen this or have a direction for me to go next.
  • Kidaver
    Ghoulscout

    500+ Posts
    • Apr 2011
    • 912

    #2
    Re: Bizhub C7000P jam 1701 and 1710

    I was having a similar issue and it was very intermittent. There are 3 clutches in the PFU and it could be any one of those 3. They are all the same so what I did was order 1 clutch swap them till I found the one that was acting up. It's not the most efficient way but it saves you from buying more clutches than you need.
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

    Comment

    • Mick01
      Trusted Tech

      250+ Posts
      • Nov 2012
      • 362

      #3
      Re: Bizhub C7000P jam 1701 and 1710

      <Symptom>
      There are frequent jam(J-1610/1710) from overrunning a paper when waiting paper registration for previous paper.

      <Cause>
      The overrunning would be gradually easier if these clutches became loosely due to the load of the brake for PFU horizontal conveyance & for intermediate conveyance of main body. Then, jam occurs when the overrun is greater than limitation.

      <Solution>
      Mounting brake kit to reduce the load of these clutch to intermediate roller of main body & pre-registration roller of PFU.
      *Countermeasure kit
      <For body> Part Name :C7000/6000 brake kit Part Number :A1DUR90200
      <For PFU> Part Name :PFU brake kit Part Number :A0U4R90100

      <Subject Model>
      For main body :bizhubPRESS C7000/C7000P/C6000/C70hc
      For PFU :PF-602/PF-602m

      Order and fit these modified parts for J-1710.
      J-1701 is related to not picking up paper in tray. Confirm you have the correct paper type/weight in the tray and adjust air assist.

      Comment

      • sauce_boss
        Technician
        • Oct 2011
        • 26

        #4
        Re: Bizhub C7000P jam 1701 and 1710

        Replacing the horizontal conveyance clutches took care of the issue. In talking to our Konica DSM he has said that replacing the clutches with part number 57GA82010 instead of the original clutches part number 56AA82012 would be better as they are stronger.

        Comment

        • Kidaver
          Ghoulscout

          500+ Posts
          • Apr 2011
          • 912

          #5
          Re: Bizhub C7000P jam 1701 and 1710

          I'll keep that in mind if mine starts acting up like that again. Thanks for the follow up.
          "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

          Comment

          Working...