[Help] c7000 and density balance adj. for all

[tinto89]

Hi guys!
on c7000 there is a way to adjust the color balance without going to act physically on the distance between the drum and charging unit.
only that the regulation includes the specific paper type, there a way to adjust the machine in general?
I read in the service manual but I did not understand very much
DipSW 2 - (5.6) Adjustment of value combination ratio in the density balance adjustment
any of you have got to try?
thanks

[JustManuals]

Re: [Help] c7000 and density balance adj. for all

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[neil greenhough]

Re: [Help] c7000 and density balance adj. for all

There is an application called Colourcare which allows you to print out charts from the machine. Then you follow the manual for colourcare which will then adjust unevenness across all colours. This can then be saved to the machine. The application is on the Fiery disk.

[Mick01]

Re: [Help] c7000 and density balance adj. for all

Hi,
You can also use XRite Profile Maker 5 software (in demo mode). You will also require an Eye One or Eye Two spectro.
Procedure is outlined in the latest troubleshooting guide.