If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
We have machines of bizhub 223 bt wnever we put hard disks after sone time they start hanging plz any who knows da solution I need some assistance
Thanks In advance
After installing the hard disk, you should do the following 3 steps:
1. system 2 -> hdd -> choose installed
2. state confirmation -> hdd -> format -> logical format
3. state confirmation -> hdd -> format -> ssd to hdd data
All these steps must be done in service mode and between every step a restart is necessary.
Comment