Parts help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JVC
    Trusted Tech

    100+ Posts
    • Jun 2011
    • 151
    #1

    Parts help

    I have a customer that has a Konica Minolta Bizhub c452 that has a damaged finisher. They would like me to remove the bridge unit and use it with out the finisher. I am looking for the part number for the cover that I need to put on if the bridge unit is not there. I have bought the service manual and parts book from JustManuals.com (thank you for a great site) but do not see the part. Can someone tell me what section to look in?

    Thank you in advance
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: Parts help

      What your looking for is the OT-503. This is normally a sales item, and is ordered as a complete assembly. There are about 16 different parts required, it's not just a dumb output tray. Emujo

      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • Jhonjon
          Trusted Tech

          100+ Posts
          • Sep 2013
          • 207
          #3
          Re: Parts help

          Hopefully this is what you've been looking. If it is thesame with Bizhub 451 this is the part number. A092 1600 00 (Paper exit cover/left.)

          Exit cover.JPG

            Comment

            • JVC
              Trusted Tech

              100+ Posts
              • Jun 2011
              • 151
              #4
              Re: Parts help

              Thank you for the reply.

                Comment

                Previous template Next
                Working...