Wich one 2 buy - CF8050 or C350?

[dudley]

the brackets go on the left side of the machine and they are used to hook the sorter on with, The large bracket goes on the bottom and the other up above exit area. You then position the sorter in place but angled away from the the fron so you can hook up the wires(make sure the copier is off and unplugged or you WILL fry boards. Once the wires are hooked up those copper fingers on the brackets slide into cutouts on the sorter frame then screws are used to attach the front of the sorted to the brackets.

Basically you have to position the sorter slightly forward then get the fingers to go into the sorter frame, then push rearward to latch them together, There are 2 sloted holes inside the front door, line them up with the threaded holes in the mount brackets and screw them together.

MAKE SURE THE POWER IS OFF AND UNPLUGGED(second warning)

[copyplus]

sorter hookup

Hi Dudley
I have screwed those two metal metal plates one at top and one at bottom of the left side of the machine, see attached image. If this is ok, please let me know. The sorter will be basically slided into the fingers of these metal plates by pushing it backward. There are 3 other screws on the bottom plate, they are screwed on the plate, but I don't know if they will be screwed to something else. thanks
[IMG]file:///C:/Documents%20and%20Settings/Admin/Desktop/IMG_0105.JPG[/IMG][IMG]file:///C:/Documents%20and%20Settings/Admin/Desktop/IMG_0105.JPG[/IMG][IMG]file:///C:/Documents%20and%20Settings/Admin/Desktop/IMG_0105.JPG[/IMG]

[dudley]

You shouldn't need those screws but they may be holding the bracket together. The brackets are in the right place so now hook up the connectors and slide onto the fingers and attach the front screws and you are done.

Also after you have it attached, go into your print driver and setup the options list to include that finisher

[copyplus]

8050 sorter hookup

Hi Dudley
Thanks. With your great help I was able to set up network and hooked up my sorter. Earlier I called the mechanic and he could not hook up the sorter because he had not worked on this machine before.
I have another posting on Toshiba Estudio 80 forum for LCF problem. One of the members helped me to release the LCF but it is still giving me problem. I posted back on and no reponse yet. Maybe you or someone else can help me on this. I have already spent almost $500 on two different technicians who could not figure out the problem. One of them said the logic boards need to be changed and the other said that this machine is too old and the parts are not available and he cannot do anything.
Thanks to all who help others on this forum.

[dudley]

sorry, can't help you on the toshiba, never worked on one, just KM machines

[copyplus]

C350 copy quality

My C350 is giving me more green in printing. I tried to caliberate the colors but I don't know how to do it. I just ran calibration couple of time from the menu but it did not work. any suggestion?
thanks