Bizhub C203 error CC172

[Wild Bill]

I am wanting to know if this is a quick fix or a difficult problem to repair
CC172 Dynamic link error during starting (AP2)

Just doing a favor but i really don't want to get married to this thing; Any solutions or advice appreciated.
I do have the Manual Thanks!

[stevena86]

Re: Bizhub C203 error CC172

Make sure that there is no other controller enabled in the service mode. Service Mode -> System 2 -> Image Controller Setting.

Try flashing the firmware also to the latest version, G20-R6.

[Wild Bill]

Re: Bizhub C203 error CC172

Set to "0" and Bingo

Thanks!