How to reset transfer belt unit and fusibng unit for C452 ?

[asemany]

hi
Does anyone know
How to reset transfer belt unit and fusibng unit for C452 ?

[hotfuser]

Re: How to reset transfer belt unit and fusibng unit for C452 ?

hi
Does anyone know
How to reset transfer belt unit and fusibng unit for C452 ?

you need to do a new release for each part

After replacing fuser unit or transfer belt you will have to perform a New release to clear life counter.
1. in service mode select (counter)>(life)>(new release)
2. open lower front door
3. select unit to be New released
4. press the start key

this should reset the belt or fuser unit

[asemany]

Re: How to reset transfer belt unit and fusibng unit for C452 ?

you need to do a new release for each part

After replacing fuser unit or transfer belt you will have to perform a New release to clear life counter.
1. in service mode select (counter)>(life)>(new release)
2. open lower front door
3. select unit to be New released
4. press the start key

this should reset the belt or fuser unit

Thank you so much for your help