KM 363 will not pull an IP address

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rrrohan
    Service Manager

    Site Contributor
    1,000+ Posts
    • Sep 2011
    • 1977

    #16
    Re: KM 363 will not pull an IP address

    Originally posted by Hansoon
    Errr....Huh?

    Hans
    Well dhcp is optional its up to you if you assign the IP yourself or want it automated

    Comment

    • Hansoon
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Sep 2007
      • 3389

      #17
      Re: KM 363 will not pull an IP address

      Well dhcp is optional its up to you if you assign the IP yourself or want it automated
      I prefer making a MAC-reservation in the router for an address outside of the DHCP range. Works all the time flawless for me.

      DHCP is very comfortable for workstations and especially mobile units such as laptops without the need to scan to, but IMHO not for MFP's

      Hans
      “Sent from my Intel 80286 using MS-DOS 2.0”

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #18
        Re: KM 363 will not pull an IP address

        You can avoid many headaches by utilizing DHCP/reservation and printing to the host name instead of the IP address. Now you never get duplicate IPs issues. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • rrrohan
          Service Manager

          Site Contributor
          1,000+ Posts
          • Sep 2011
          • 1977

          #19
          Re: KM 363 will not pull an IP address

          Originally posted by emujo
          You can avoid many headaches by utilizing DHCP/reservation and printing to the host name instead of the IP address. Now you never get duplicate IPs issues. Emujo
          printing to hostname just adds the chance for DNS issues to cause printing problems tho

          Comment

          Working...