How to set bizhub 350 A4 landslide position on RADF and portrait output copy on LCT
-
-
Re: How to set bizhub 350 A4 landslide position on RADF and portrait output copy on L
It should be a combo of auto reduce LD to LT and manually selecting the paper source (if you have more than one LT tray). You may have to set your size detection to metric if not already defaulted. Emujo "landslide" HA!!!If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals. -
Re: How to set bizhub 350 A4 landslide position on RADF and portrait output copy on L
LOL.
Well the Philippines hat their problems with nature disasters that might explain......
Hans“ Sent from my Intel 80286 using MS-DOS 2.0
“
https://www.copytechnet.com/images/smilies/biggrin.pngComment
-
Re: How to set bizhub 350 A4 landslide position on RADF and portrait output copy on L
Just set machine to "Auto paper" and that should be all you need to do. It will electronically rotate the image to fit the paper in the LCT.Comment
-
Re: How to set bizhub 350 A4 landslide position on RADF and portrait output copy on L
RTFMComment
Comment