BH-C-353, monochrome K

[Hansoon]

Is there a W7 monochrome K driver for the BH-C-353? Cannot find anything on the KonicaMinolta site. Customer wants to have a driver for strict B&W printing only without the use of the CMY units.

Use of the Grayscale settings in the existing driver results in color prints.

Hans

[Rvale]

Re: BH-C-353, monochrome K

Is there a W7 monochrome K driver for the BH-C-353? Cannot find anything on the KonicaMinolta site. Customer wants to have a driver for strict B&W printing only without the use of the CMY units.

Use of the Grayscale settings in the existing driver results in color prints.

Hans

[Hansoon]

[Rvale]

[Hansoon]

[907tec]

Re: BH-C-353, monochrome K

Hans, do you have the latest firmware for these machines? Or even better, do you have Bulletin #8607 related to IU/Life optimization? There are some settings related to black-ready ACS that might help you. Also take a look at the theory manual (in my version, section 08.3.12 & 08.3.13 related to ACS Mode Control).

[Hansoon]

Re: BH-C-353, monochrome K

I have bulletin #7528 about Unit Life Optimized Settings but not #8607. Would love to have it though....

I have TheoryOfOperation V2 but section 8 goes only to 8.2.7, no further.


Hans