Fiery old IC-406 uknown password

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zalim
    Technician
    • Mar 2012
    • 44
    #1

    Fiery old IC-406 uknown password

    Hi once again guys,

    This time i have a bit of problem with the old Bizhub C300/C352 Fiery IC-406.

    I got this fiery from a firm, they had a password on it, i have tried every possible combination of so called "standard passwords" like

    Fiery.1
    fiery.1
    FIERY.1
    ADMIN
    admin
    Admin
    password
    Password
    PASSWORD


    but none of them is working, so i called the firm and asked them and even they have no idea.

    Now i know there is a way this fiery can print the password out but i need some sorts of software and a .ps file for that, can anyone here give me the software and files i need to get the password?
    Or is there a way to reset the fiery on default settings?

    Thanks alot in advance
    Tags: None
    • Rvale
      Technician

      50+ Posts
      • May 2013
      • 83
      #2

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Re: Fiery old IC-406 uknown password

          Search this forum for a file called password.ps, connect to the direct queue of the Fiery (\\ip address\direct), send the password.ps file to the direct queue and it will generate a page with the password listed on it. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • zalim
              Technician
              • Mar 2012
              • 44
              #4
              Re: Fiery old IC-406 uknown password

              Hi thanks for the quick reply guys,

              i found the .ps file but still cant connect to my direct queue, i am connected to Fiery, but when i give this 10.31.134.84\direct its not working,
              10.31.134.84 is the ip of Fiery which i printed out thourgh config page and i can login but when i give this               10.31.134.84\direct its not connecting.


                Comment

                • zalim
                  Technician
                  • Mar 2012
                  • 44
                  #5
                  Re: Fiery old IC-406 uknown password

                  i think i got something as soon as i have it will inform you guys

                  thanks alot

                    Comment

                    • emujo
                      Field Supervisor

                      2,500+ Posts
                      • Jun 2009
                      • 3009
                      #6
                      Re: Fiery old IC-406 uknown password

                      If the direct queue was not setup as "published" during the Fiery config. you will have to push the .ps file to the direct queue using command workstation. Some of the Fierys have a factory reset icon that is available w/o needing to enter the password. You will have to reconfigure everything after this though. Emujo

                      Also, did you try leaving the password field blank?
                      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                        Comment

                        • zalim
                          Technician
                          • Mar 2012
                          • 44
                          #7
                          Re: Fiery old IC-406 uknown password

                          Originally posted by emujo
                          If the direct queue was not setup as "published" during the Fiery config. you will have to push the .ps file to the direct queue using command workstation. Some of the Fierys have a factory reset icon that is available w/o needing to enter the password. You will have to reconfigure everything after this though. Emujo

                          Also, did you try leaving the password field blank?


                          worked like a charm for me ! thanks alot

                          found password.ps on this forum and downloaded work station from fiery itself.

                          THANKS ALOT GUYS

                            Comment

                            Previous template Next
                            Working...